MCR-800 UHF-RFID-Modul R2000
MCR-800 UHF-RFID-Modul R2000
kurze Beschreibung:
Art.-Nr.:MCR-800
Schnelle Details
Place of Origin: Guangdong, China
Brand Name: Leadercolor
Keyword: UHF RFID Module R2000
Material: Metal
Output Power: 0-33 dBm
Größe: 235x235x57mm(UNS), 260x260x45mm(EU)
Frequenz: Weltweit 840-960 MHz, USA 902–928 MHz, EU 865-868 MHz
Lesen&Write Range: Read 1-15m adjustable, tag and environment dependent
Protokoll: ISO/IEC 18000-6C and 6B, EPC Class1 Gen2
Working Mode: Active Trigger Answer Password Mask mode(optional)
Farbe: Red
Reading Distance: 1-15M
Inventory speed: 200pcs/s
PRODUKTDETAIL
PRODUKTBROSCHÜRE
FAQ
PRODUKTDETAIL
Keyword: UHF RFID Module R2000
Material: Metal
Output Power: 0-33 dBm
Größe: 235x235x57mm(UNS), 260x260x45mm(EU)
Frequenz: Weltweit 840-960 MHz, USA 902–928 MHz, EU 865-868 MHz
Lesen&Write Range: Read 1-15m adjustable, tag and environment dependent
Protokoll: ISO/IEC 18000-6C and 6B, EPC Class1 Gen2
Work mode: Active Trigger Answer Password Mask mode(optional)
Farbe: Red
Reading Distance: 1-15M
Inventory speed: 200pcs/s
Inventory speed: 200pcs/s
Description
| Feature | Description | |
| 1 | Based on Indy R2000 chip | RF transceiver is Impinj Indy R2000. |
| 2 | High performance anti-collision algorithm | Unique I – Serch multi-tags identification algorithm. Provide the highest efficiency. |
| 3 | Optimized algorithm for a little of tags | Better tag response time. Optimized for small tag quantity applications. |
| 4 | Dual CPU architecture | Main CPU is responsible for tag inventory, assistant CPU is responsible for data management. Inventory and data transfer are parallel and simultaneous. This feature improves the total performance significantly. Assistant CPU is responsible for generating real random number. Assistant CPU is responsible for system operating surveillance. |
| 5 | Fast 4/8 antenna switch inventory | High speed inventory therefore antennas could be switched rapidly. The minimum inventory duration for an antenna is 25ms. Every antenna’s inventory duration is configurable. |
| 6 | Two inventory modes | Buffer mode and real time mode. In buffer mode, inventoried tag will be stored in buffer. This mode improves the efficiency of multi tag inventory. |
| 7 | Hardware system halt detection | Hardware CPU status surveillance. Run for 24 hours×365 days without system halt. |
| 8 | Low operation voltage | The lowest operating supply voltage is 3.7V. Can be powered by lithium battery. |
| 9 | Low power consumption | Low-power Mode, few tags only 600mA +/-10%(5V DC Input). Maximum out power only 1.2A +/-10%(5V DC Input). |
| 10 | PA health surveillance | PA status surveillance. Make sure PA never works under saturated state. Protected it for long term operation. |
| 11 | 18000-6B/C full compatible | 100% 18000-6B/C compatible. Can be switched rapidly between protocols. |
| 12 | 18000-6B large data read/write | Lesen 216 bytes in one time takes less than 500ms. Schreiben 216 bytes in one time takes less than 3.5s. Can also read/write data with various lengths. Extremely stable (approximate 100% success rate). |
| 13 | Antenna connection detection | Detect antenna connection. Protecting RF receiver. Can be cancelled by command. |
| 14 | Bistatic antenna configuration | Bistatic antenna configuration improves receive sensitivity by 13dB. |
| 15 | High power LED driver | Can output 50mA output current to drive a high power LED. |
| 16 | Excellent onboard power system | 8 independent power supplied on board. Every unit is supplied independently. Each power supply has soft start function. Improves the stability of the power supply system. |
| 17 | Multi-board temperature sensor | Multi point surveillance, Accurate monitoring system operating temperature. |
| 18 | Dual backup power output correction | Make sure output power can be fine adjusted. Two mutually backup power parity modules. Unless also damaged, the system can operate normally. |
| 19 | Concise and effective command system | Serial communication interface. Simple, convenient and effective for easy integration. |
| 20 | Excellent thermal design | All heating devices have thermal structure. A large area of heat sink contact surface. Thermal coupling interface using high thermal conductivity solid materials which are non-volatile under high temperature. |
Physical Info
| Module Type | MCR-800 |
| RF Channel | Four channel |
| RF Connector | SMA |
| Antenna Connection Mode | Four Antenna |
| Interface Connector | Molex 53261-1571 |
| RF Connectors Material | Gold-plated brass |
| PCB Material | Rogers FR4 gold-plated |
| Shield Material | Aluminum |
PRODUKTBROSCHÜRE
FAQ
We are original equipment manufacturer in RFID reader for over 12 Jahre.
Our RFID reader MOQ is 1pc, RFID tag MOQ is 100pcs.
T/T , Western Union , Paypal , Alibaba trade assurance.
All our product have 1 year warranty if no human caused.
3.Ja, most our technical information have upload to our website: www.leadercolor.com , you can download it directly from website ,also you can contact our oversea salesman send to you.
